Coolstar Downloads

PC software for configuration plus remote control and monitoring

• CryodrivePad for all new Cryodrives
• PLCCom software (for older Cryodrives with serial numbers lower than R71-0600 or R76-0583)

Operation manuals

• 12 W Coldhead manual (for 0/12 coldhead, 2/9 coldhead, Coolstar 400 and 800 Cryopumps)
  
• 40 W Coldhead manual (for 0/40 coldhead, 6/30 coldhead, Coolstar 1500 and 3500 Cryopumps)
• Cryodrive manual (older 1.5 and 3.0 kW Cryodrives)
• New Cryodrive manual (serial numbers greater than R71-0600 or R76-0583)

Service kit manuals

• 12 W Service Kit manual
  for 0/12 coldhead, 2/9 coldhead, Coolstar 400 and 800 Cryopumps
• 40 W Service Kit manual
  for 0/40 coldhead, 6/30 coldhead, Coolstar 1500 and 3500 Cryopumps

The service manuals shown on this page are intended to be used as guides when servicing Coolstar products. The manuals are made available on the understanding that all work will be carried out by trained technicians familiar with the Coolstar range.

If there is any doubt as to whether the service can be carried out correctly, we strongly recommend that the equipment is sent to Oxford Cryosystems to be serviced. Oxford Cryosystems take no responsibility for any damage to the equipment caused by faulty service work.